Recent 90 days, by announcement date (UTC). Country topics include explicit import or export scope mentions; worldwide scope is shown on each item rather than copied into every country topic.
US sets new antidumping and countervailing duty deposits for Canadian softwood lumber
Commerce's October 19, 2026 final review results set antidumping deposit rates for covered Canadian softwood lumber at 17.00% for Canfor, 4.71% for West Fraser, 13.13% for Resolute and 10.64% for the listed non-selected companies. Countervailing deposit rates are 12.42% for Resolute, 15.31% for West Fraser and 14.11% for the non-selected companies listed in that review. The respective rates apply to covered shipments entered for consumption or withdrawn from warehouse for consumption from October 19, 2026.
Announced
Effective
Import / export scope: United States / Canada · HS 44
US sets 78.17% antidumping deposits for two Taiwanese steel-nail exporters
Commerce's final 2024–2025 review sets a 78.17% antidumping cash-deposit rate for Faithful Engineering Products and Top Forever Screws on covered steel nails from Taiwan entered for consumption or withdrawn from warehouse for consumption from October 19, 2026. Other previously reviewed firms retain their applicable company-specific rates, and the all-others rate remains 2.16%.
Announced
Effective
Import / export scope: United States / TW · HS 73 · 78 · 79 · 82
US waives Graham Act duties on Russia and countries covered by secondary tariffs
The October 16, 2026 executive order implementing the Graham Act waives all duties under sections 112 and 113 of the Act and the order itself. This includes the stated 500% increase on Russian goods and 100% increases for specified countries linked to Russian energy purchases or sanctions evasion. The waiver remains in effect until the President or Secretary of State determines further action is appropriate under section 4(d).
Announced
Effective
Import / export scope: United States / All countries · HS *
US court-related notice assigns China Cornici a 220.87% wood-moulding dumping deposit rate
Commerce's October 15, 2026 notice, applicable October 5, amends the 2020–2022 review of Chinese wood mouldings and millwork products following a September 23 court judgment, assigning China Cornici the China-wide 220.87% cash-deposit rate. Commerce will revise deposit instructions for that company but will not issue revised instructions for Chen Chiu. If the judgment becomes final and conclusive, Commerce will not order assessment of duties on China Cornici's already-liquidated entries for that review period.
Announced
Effective
Import / export scope: United States / China · HS 44
US sets 8.89% wood-moulding countervailing deposits for China Cornici and RaoPing after court review
Commerce's October 15, 2026 notice amends the 2020–2021 Chinese wood-moulding and millwork countervailing duty review following the September 23 court judgment. Applicable October 3, it assigns China Cornici and RaoPing HongRong Handicrafts cash deposit rates of 8.89% each, pending any appeals. Commerce cannot reliquidate the already-liquidated review-period entries at issue.
Announced
Effective
Import / export scope: United States / China · HS 44
US invites comments on proposed dumping margins of 3.62%–6.47% for Italian pasta
On October 15, 2026, Commerce published preliminary results of its 2024–2025 review of certain Italian pasta, proposing dumping margins of 3.62% for La Molisana, 6.47% for Garofalo and 5.05% for covered companies not individually examined. Case briefs are due within seven days after the last verification report is issued, and rebuttals within five days after the case-brief deadline. New cash-deposit rates apply only after publication of the final results.
BIS defines US content for covered USMCA metal-tariff imports from Canada and Mexico
BIS guidance applies from 12:01 a.m. Eastern Time on October 14, 2026 to covered Canadian and Mexican products qualifying for USMCA preferences under clause (2)(d) of Proclamation 11032. US content includes the value attributable to parts wholly obtained, entirely produced or substantially transformed in the United States, plus previously uncounted value attributable to steel melted and poured there or aluminum or copper smelted and cast there.
Announced
Effective
Import / export scope: United States / Canada · Mexico · HS 84 · 87
US continues antidumping and countervailing duty orders on Chinese boltless steel shelving
Commerce published continuation of the antidumping and countervailing duty orders on Chinese boltless steel shelving units prepackaged for sale on October 14, 2026, with effect from September 29, 2026. Covered goods include add-on kits and units with or without decks. CBP will continue collecting cash deposits at the rates in effect at entry.
Announced
Effective
Import / export scope: United States / China · HS 94
US seeks comments on proposed 51.82%–70.21% dumping margins for Chinese xanthan gum
Commerce's October 14, 2026 preliminary review results propose dumping margins of 70.21% for Deosen Biochemical (Ordos), 51.82% for the Fufeng entity and 56.20% for Jianlong Biotechnology on Chinese xanthan gum for July 1, 2024 through June 30, 2025. Case briefs are due within 21 days of publication and rebuttals within five days after that deadline. Revised cash-deposit rates would apply only upon publication of final review results.
Announced
Effective
Import / export scope: United States / China · HS 39
US seeks comments on proposed 3.98% subsidy rate for SRF's Indian PET film
Commerce's October 14, 2026 preliminary countervailing duty review results propose a 3.98% subsidy rate for SRF Limited's Indian polyethylene terephthalate film, sheet and strip for the 2024 review. Case briefs are due within 21 days of publication and rebuttals within five days after that deadline. Revised cash-deposit rates would apply only upon publication of final review results.
Announced
Effective
Import / export scope: United States / India · HS 39
US sets Japanese hot-rolled steel antidumping deposits at 13.96% for Nippon Steel and 0% for Tokyo Steel
Commerce's October 14, 2026 final review results set antidumping cash-deposit rates for certain Japanese hot-rolled steel flat products at 13.96% for the Nippon Steel entity and the listed non-examined companies, and 0% for Tokyo Steel Manufacturing. These rates apply to covered goods entered for consumption or withdrawn from warehouse for consumption from October 14, 2026. The all-others rate remains 5.58%.
Announced
Effective
Import / export scope: United States / Japan · HS 72
US seeks comments on proposed 28.52% dumping margin for Vietnamese paper shopping bags
Commerce's October 14, 2026 preliminary review results propose a 28.52% dumping margin for International Packaging Limited Company on certain Vietnamese paper shopping bags for January 3, 2024 through June 30, 2025. Case briefs are due within 21 days of publication and rebuttals within five days after that deadline. Revised cash-deposit rates would apply only upon publication of final review results.
Announced
Effective
Import / export scope: United States / Vietnam · HS 48
US seeks comments on proposed 90.80% Vietnam-wide dumping margin for stainless steel pressure pipe
On October 13, 2026, Commerce published preliminary results of its July 1, 2024–June 30, 2025 review of welded stainless steel pressure pipe from Vietnam, proposing a 90.80% dumping margin for the Vietnam-wide entity. Case briefs are due within 21 days of publication, with rebuttal briefs due five days after the case-brief deadline. Any cash-deposit rates established by this review would apply only upon publication of final results.
Announced
Effective
Import / export scope: United States / Vietnam · HS 73
US suspends customs liquidation for goods from Mexico's Carolina Performance Fabrics facility
On October 13, 2026, USTR requested Mexico's review of alleged labor-rights violations at Carolina Performance Fabrics in Guanajuato under the USMCA Rapid Response Labor Mechanism. The United States suspended liquidation of unliquidated entries of goods from this facility, which makes high-performance automotive textiles. Mexico has 10 days to agree to a review and, if it agrees, 45 days from October 13 to complete it.
Announced
Effective
Import / export scope: United States / Mexico · HS *
US seeks comments on proposed 20.08% and 73.30% dumping margins for Cambodian paper shopping bags
Commerce's October 9, 2026 preliminary review results propose dumping margins of 20.08% for Nice Packaging (Cambodia), Brandart and TB Packaging (Cambodia), and 73.30% for UUPak, on certain paper shopping bags for the 2024–2025 review. Case briefs are due within 21 days of publication and rebuttals within five days after that deadline. New cash-deposit rates would take effect only when final review results are published.
US sets Korean hot-rolled steel countervailing duty deposits at 1.28% for Hyundai and 3.68% for POSCO
Commerce published final results of the 2023 countervailing duty review of certain Korean hot-rolled steel flat products on October 9, 2026, establishing rates of 1.28% for Hyundai Steel and 3.68% for POSCO. These rates apply to cash deposits for covered shipments entered for consumption or withdrawn from warehouse for consumption on or after October 9, 2026. Firms not reviewed retain their applicable company-specific or all-others deposit rates.
Announced
Effective
Import / export scope: United States / South Korea · HS 72
US opens comments on proposed 1.14% dumping margins for Thai passenger and light-truck tyres
On October 9, 2026, Commerce published preliminary results of its 2024–2025 review of Thai passenger vehicle and light-truck tyres, proposing a 1.14% dumping margin for Sumitomo Rubber (Thailand) and the non-examined companies covered by the review. Case briefs are due within 21 days of publication, with rebuttals due five days after the case-brief deadline. New cash-deposit rates would apply only upon publication of final review results.
Announced
Effective
Import / export scope: United States / Thailand · HS 40 · 87